Laser Innovations offers sales and full warranty support of your SkyLight laser system. From Innova replacement plasma tubes to power supply repair; Laser Innovations is your ion laser source. Innova 400 - Large Frame Ion Laser | Laser Systems Serviced
- Coherent Innova 400-10 Argon Ion Laser System
- Coherent Innova 400-15 Argon Ion Laser System
- Coherent Innova 400-20 Argon Ion Laser System
- Coherent Innova 400-25 Argon Ion Laser System
- Coherent Innova 400-10 UV Argon Ion Laser System
- Coherent Innova 400-15 UV Argon Ion Laser System
- Coherent Innova 400-20 UV Argon Ion Laser System
- Coherent Innova 400-25 UV Argon Ion Laser System
- Coherent Innova 400-2K Krypton Ion Laser System
- Coherent Innova 400-3K Krypton Ion Laser System
- Coherent Skylight-400 Argon Ion Laser System
- Coherent Skylight-400 Krypton Ion Laser System
|
[Return to Top]
Innova 400 - Large Frame Ion Laser | Laser Systems Available for Purchase
- Coherent Innova 400-10 Argon Ion Laser System
- 10.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-15 Argon Ion Laser System
- 15.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-20 Argon Ion Laser System
- 20.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-25 Argon Ion Laser System
- 25.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-10 UV Argon Ion Laser System
- 10.0 Watt / 2.0 Watt UV, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-15 UV Argon Ion Laser System
- 15.0 Watt / 3.0 Watt UV, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-20 UV Argon Ion Laser System
- 20.0 Watt / 4.0 Watt UV, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-25 UV Argon Ion Laser System
- 25.0 Watt / 5.0 UV, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-K2 Krypton Ion Laser System
- 2.6 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Innova 400-K3 Krypton Ion Laser System
- 4.6 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Skylight-400 Argon Ion Laser System
- 20.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Skylight-400 Krypton Ion Laser System
- 6.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
- Coherent Purelight-400-10 Argon/Krypton Ion Laser System
- 10.0 Watt, 1 year / 2000 hour warranty on Innova Plasma Tube
|
[Return to Top]
Innova 400 - Large Frame Ion Laser | General Data
Power supply dimensions | Height | 94.0 cm 37.00 in | Width | 38.1 cm 15.00 in | Length | 61.0 cm 24.0 in | Weight | 136 Kg 300 lbs |
|
Laser head dimensions | Height | 19.8 cm 7.81 in | Width | 20.3 cm 8.0 in | Length | 209.0 cm 82.2 in | Weight | 85 Kg 186 lbs |
|
Remote module dimensions | Height | 7.37 cm 2.9 in | Width | 16.51 cm 6.5 in | Length | 24.13 cm 9.5 in |
|
Crated power supply dimensions and weight | Height | 119.2 cm 47.0 in | Width | 66.5 cm 27.0 in | Length | 71.0 cm 28.0 in | Weight | 172 Kg 378 lbs |
|
Crated laser head dimensions and weight | Height | 61.0 cm 24.0 in | Width | 45.7 cm 18.0 in | Length | 290.0 cm 114.2 in | Weight | 152 Kg 334 lbs |
|
[Return to Top]
Innova 400 - Large Frame Ion Laser | Specifications
System Parameter Specifications | Bore configuration | Copper-tungsten disks w/ one piece ceramic envelope | Plasma Tube Cooling | Conductively water cooled | Resonator Construction | Super Invar | Cavity specification | Flat high reflector, long radius output coupler | Output Polarization | 100:1 Vertical: Horizontal | Cavity length: Multiline / Single-line | 1920 mm / 1950 mm | Excitation | Current regulated DC | Input voltage | 480 +/- 10% VAC 50 or 60 Hz, 3 phase with ground Wye or Delta configuration | Maximum input current: | | Argon | 70 Amps per phase at 480 VAC | Krypton | 70 Amps per phase at 480 VAC | Maximum tube discharge current: | | Innova 400-10, -10/2 | 50 Amps | Innova 400-15, -15/3 | 55 Amps | Innova 400-20, -20/4 | 60 Amps | Innova 400-25, -25/5 | 60 Amps | Innova 400-25/7 | 65 Amps | Innova 400-K2, -K3 | 65 Amps | Water flow rate | 22.7 liters/min. (6 gal./min.) | Water incoming temperature: | 10oC (50oF) - 35oC (95oF) | Water pressure: range / back pressure | 241-414 kPa (35-60 psi) / <138kPa (20 psi) | Hardness | <100 mg/l (8.8 grains/gal) or 100 parts/million of calcium | Resistivity | 10Kohm-cm - 1 Mohm-cm | Particulate Size | <200 microns in diameter, a 60 micron water filter is supplied with the laser | Total heat load for Argon and Krypton lasers | 55 kW (3133 BTU/min) |
Specifications are for reference only and do not constitute warranty specifications on serviced lasers by Laser Innovations.[Return to Top]
Performance Parameter Specifications | Beam diameter(1): | | Argon | 1.9 mm | Krypton | 2.0 mm | Beam divergence (half angle)(2): | | Argon | 0.4 mrad | Krypton | 0.5 mrad | Beam pointing stability(3) | | Angle | <10 urad/oC | Offset at output coupler | <10 um/oC | Long-term power stability: | | Current Regulation | +/- 1.0% w/ PowerTrack(4) +/- 3% w/o PowerTrack(5) | Light Regulation | +/- 0.5% w/ PowerTrack(4) +/- 0.5% w/o PowerTrack(5) | Optical noise (RMS)(6): | | Current Regulation | +/- 0.3% w/ PowerTrack(4) +/- 0.4% w/o PowerTrack(5) | Light Regulation | +/- 0.3% w/ PowerTrack(4) +/- 0.3% w/o PowerTrack(5) |
The above specifications subject to change without notice. All performance specifications are measured at the specified output at 514.5 for Argon and at 647.1 for Krypton. (1) Beam diameter is measured at the output coupler at 1/e2 or 0.13534 points. (2) half angle. Inside the resonator, the beam waist is located at the flat high reflector. The long-radius output coupler acts as a weak lens to transform the output beam parameters. The values listed for beam divergence takes into account the weak lens effect. (3) Per oC change in air or water temperature after a 1.5 hour warm up with PowerTrack on. (4) Maximum peak variation after a 15 minute warm-up. (5) Maximum peak variation over any 30 minute period after a 1 hour warm-up. (6) Measured with a 10 Hz to 2 MHz photodiode driving a resistive load at 514.5 nm for argon and 647.1 nm for Krypton at specified output power levels. Specifications are for reference only and do not constitute warranty specifications on serviced lasers by Laser Innovations.[Return to Top]
Output Power (TEMoo) Specifications Standard Power Specifications | Argon Wavelength (nm) | Innova 400-10 | Innova 400-15 | Innova 400-20 | Innova 400-25 | Innova 400-10/2 | Innova 400-15/3 | Innova 400-20/4 | Innova 400-25/5 | Innova 400-25/7 | Multiline visible | 10 W | 15 W | 20 W | 25 W | 10 W | 15 W | 20 W | 25 W | 25 W | 528.7(1) | 0.8 W | 1.0 W | 1.4 W | 1.8 W | | | | | | 514.5 | 5.0 W | 7.0 W | 9.0 W | 10.0 W | 5.0 W | 7.0 W | 9.0 W | 10.0 W | 10.0 W | 501.7(1) | 0.8 W | 1.0 W | 1.4 W | 1.8 W | | | | | | 496.5(1) | 1.2 W | 1.8 W | 2.4 W | 3.0 W | | | | | | 488.0 | 4.0 W | 6.0 W | 7.0 W | 8.0 W | 4.0 W | 6.0 W | 7.0 W | 8.0 W | 8.0 W | 476.5(1) | 1.2 W | 1.8 W | 2.4 W | 3.0 W | | | | | | 472.7(1) | 0.4 W | 0.6 W | 1.0 W | 1.3 W | | | | | | 465.8(1) | 0.2 W | 0.4 W | 0.6 W | 0.8 W | | | | | | 457.9(1) | 0.8 W | 1.2 W | 1.4 W | 1.5 W | | | | | | 454.5(1) | 0.2 W | 0.4 W | 0.6 W | 0.8 W | | | | | | UV Multiline | | | | | 2.0 W | 3.0 W | 4.0 W | 5.0 W | 7.0 W | 351.1-385.8 | | | | | 1.2 W | 2.0 W | 2.8 W | 3.6 W | 4.4 W | 333.6-363.8 | | | | | 2.0 W | 3.0 W | 4.0 W | 5.0 W | 7.0 W | 300.3-335.8 | | | | | 0.7 W | 1.5 W | 2.0 W | 2.5 W | 3.0 W | 275.4-305.5 | | | | | 0.3 W | 0.6 W | 0.9 W | 1.2 W | 1.6 W |
(1) optional power specifications Output Power (TEMoo) Specifications Krypton Power Specifications | Krypton Wavelength (nm) | Innova 400-K2 | Innova 400-K3 | Multiline Visible | 2.6 W | 4.6 W | Single Line 647.1 | 2.0 W | 3.5 W | Single Line 676.4 | 0.6 W | 0.9 W |
Krypton Wavelength (nm) | Innova 400-K2 | Innova 400-K3 | Multiline red | 2.6 W | 4.6 W | 799.3 / 793.1 | 200 mW | 300 mW | 752.5 | 800 mW | 1.2 W | 676.4 | 0.6 W | 0.9 W | 647.1 | 2.0 W | 3.5 W | 568.2 | 800 mW | 1.1 W | 530.9 | 1.0 W | 1.5 W | 520.8 | 450 mW | 700 mW | 482.5 | 250 mW | 400 mW | 476.2 | 250 mW | 400 mW | 468.0 | 400 mW | 500 mW | 415.4 | 150 mW | 280 mW | 413.1 | 1.2 W | 1.8 W | 406.7 | 600 mW | 900 mW | Multiline Configurations | | | 752.5-799.3(1) | 1.0 W | 1.6 W | 520.8-568.2(2) | 2.3 W | 3.3 W | 468.0-530.9(3) | 2.5 W | 3.5 W | 406.7-415.4(4) | 2.0 W | 3.0 W | 337.5-356.4(5) | 1.5 W | 2.0 W |
Argon / Krypton Wavelength - standard single frequency power specifications (nm) | Innova 400-10 | Innova 400-15 | Innova 400-20 | Innova 400-25 | Innova 400-K3 | 514.5 | 3.00 W | 4.20 W | 5.40 W | 6.00 W | | 488.0 | 2.40 W | 3.60 W | 4.20 W | 4.80 W | | 457.9 | 0.48 W | 0.60 W | 0.70 W | 0.82 W | | 415.4 | | | | | 0.14 W | 413.1 | | | | | 0.90 W | 647.1 | | | | | 1.75 W |
Specifications are for reference only and do not constitute warranty specifications on serviced lasers by Laser Innovations[Return to Top] Technical Questions Pertaining to Innova Large Frame Lasers
Please send all technical questions to the following E-mail address:
information@coherentlaser.com[Return to Top]
Laser Innovations 1150 E. Main Street Santa Paula CA 93060 Tel (805) 933-0015 Fax (805) 933-0042 E-mail: information@coherentlaser.com |